Paintless dent repair
From AED 300Per panel, with a maximum of five workable dents under the supplier offer. Suitability must be assessed.
BMW dent, scratch, bumper and accident repair assessment in Al Quoz. Send photos for an initial estimate, then confirm the repair plan and price after inspection before approving work.
Confirm scheduling and parking access when booking. If the vehicle cannot be driven safely, agree suitable recovery and any separate charge before collection.

What we repair
From parking damage to collision assessment, the first step is to identify the affected panels and systems. Confirm the work, parts and any specialist arrangements before booking.
Scuffs, cracks and damaged mounts need different decisions. Material, damage location, sensor areas and the applicable repair method determine whether repair or replacement is suitable. Explore BMW bumper repair.
Small dents with unbroken paint can often be pushed out without painting. Deeper creases are repaired, filled and refinished.
Light scratches on suitable gloss finishes may be polished out. Frozen and matte finishes require their own repair method and must not be polished. Scratches through the clear coat need sanding and refinishing on that area.
Front, rear and side impact damage, including the parts behind the bumper that you cannot see.
Where replacement is appropriate, the quotation identifies the panel, manufacturer and condition. Confirm the supplied part and required paintwork before approval.
Not sure which of these you need? That is fine. Send a few photos and describe how the damage happened. A scrape at walking speed and a knock at road speed can look similar on the outside but need very different repairs, and knowing how it happened helps us quote accurately.
Prices
Photos help establish an initial estimate. Your BMW Repair Dubai price follows the vehicle assessment and agreed work. These published Dubai examples offer a limited comparison for budgeting.
Per panel, with a maximum of five workable dents under the supplier offer. Suitability must be assessed.
Per panel in the supplier list. This does not establish the cost of dent repair, dismantling or adjoining-panel blending.
Per panel in the supplier list. BMW finish, material and repair requirements need a separate assessment.
Source Rapido Garage published price list. These are another workshop's prices excluding 5% VAT, not BMW Repair Dubai offers. Availability and inclusions can change. Collision, structural and specialist-finish work cannot be inferred from these examples.
Repair or replace
Choose the least extensive suitable repair that follows the applicable procedure. Preserving sound factory paint can avoid unnecessary refinishing, but damage and panel construction determine the method.
A suitable dent may be reshaped without repainting. Paint integrity, panel material, stretching, dent position and tool access determine whether the finish can be preserved.
Suits suitable dents after an access and paint checkA local repair may suit limited cosmetic damage. Repair size, finish and the paint system determine whether local refinishing is appropriate.
Suits scuffed bumper corners and small scratchesA repairable panel is reshaped and prepared for refinishing. Adjoining colour blending is included only where needed and agreed.
Suits larger dents, deep scratches and creasesReplacement may be required where the panel cannot be repaired using an approved method. The part and installation procedure must suit the vehicle.
Suits damage outside the permitted repair method
Paint matching
BMW colours such as Alpine White, Black Sapphire and Mineral Grey can look slightly different from car to car, because paint ages in the sun. Matching the code alone is not always enough.
We confirm the paint code from the vehicle label or build information. Label position varies by model. That is our starting point.
We compare the mixed colour with your actual paint, because sun exposure in Dubai changes how a colour looks over the years.
Where needed, colour is blended into adjoining panels using the paint system procedure. Confirm which panels will be refinished before approval.
The finishing process follows the paint system. Gloss finishes may be polished where appropriate. BMW Frozen and other matte finishes must retain their specified sheen and must not be polished.
Some BMW colours are harder than others. Metallic and pearl paints contain small flakes that must lie the same way as the original, and white paints can shift slightly yellow or blue depending on the batch. The aim is a consistent colour, texture and sheen, checked under suitable lighting. Existing paint condition can affect the achievable match.
After an accident
An accident is stressful enough. This is what to do next, and what we need from you before the repair can start.
Pulling to one side, new noises, warning lights or leaking fluid all mean the car should be checked before it is driven further. Call us and we can arrange recovery.
Use the official Dubai Police reporting process for collision damage and confirm the required report or repair permission before booking. Minor accident reporting is available through the official digital services.
Every policy is different. Some insurers send cars only to their own approved garages. Check your policy, then talk to us about the options before booking.
For a self-funded repair, compare repair and replacement only where both are suitable. Your quotation should name the proposed part manufacturer and condition. Ask whether a part is Genuine BMW or a specified alternative rather than relying on the term OEM alone.
Behind the bumper
A modern BMW bumper hides a lot of technology. A small knock on the outside can damage parts behind it, so where an impact could have reached them, we check behind the bumper before we confirm the final job.
Inspect affected sensors, brackets and wiring where the impact or diagnostic findings indicate possible damage.
Cruise control radar and cameras may need calibration after a bumper or windscreen repair.
The metal bar behind the bumper absorbs impact. A bent bar should be replaced, not hidden.
Broken tabs make headlights sit badly and can cause water to get in.
Front impacts can push into the radiator or AC condenser and cause leaks later.
A kerb strike or corner impact can knock the alignment out, causing pulling and tyre wear.
Initial inspection reduces uncertainty, but some damage appears only after agreed dismantling. Any additional repair scope needs a revised quotation and approval.

Dubai roads
Parking scrapes, ramp contact, stone chips and weathered paint can need different work. Describe how the damage happened so the assessment addresses more than its appearance.
Tight mall and building car parks lead to scraped bumper corners, wheel arch scuffs and door dings from neighbouring cars.
Low front bumpers and M Sport splitters catch kerbs, speed bumps and steep ramps, cracking the lower trim and spoiler.
Fast highway driving behind trucks sends grit into the bonnet, bumper and mirrors. Chips exposing metal can allow corrosion to develop, depending on the panel and exposure.
Years of strong sun dull the clear coat on roofs, bonnets and boot lids, especially on darker colours.
Our process
Photos give an initial estimate. Agree any inspection, diagnostic or dismantling charge before work begins.
After assessment, approve the repair method, parts, paintwork, required tests and total. Any additional damage requires an updated quotation.
Arrange free Dubai pickup and delivery with scheduling and access confirmed. An unsafe or non-running vehicle needs suitable recovery and any charge agreed separately.
Dents are repaired, damaged parts replaced and everything is fitted and aligned with the panels around it.
The colour and sheen are matched to the paint system. Gloss and matte finishes receive different final treatment.
Review panel fit, finish and the checks required for the repair. Collision work needs applicable diagnostic testing and any required calibration, with relevant results retained.
If we find extra damage once a panel is removed, we stop, send you photos and update the quote. Nothing extra is done without your approval.
Paint care
Strong sun, sand and heat are hard on any paint. After a repair, these habits help the new finish and the original paint stay looking the same. They also slow down the fading that makes future repairs harder to match.
Sun is the main cause of faded clear coat, especially on dark colours and roofs.
Rinse before you wipe. Dry wiping a dusty car leaves fine scratches in the clear coat.
Give fresh paint time to fully harden before machine washes and strong chemicals.
They are acidic and can mark the clear coat within days in strong heat.
Small chips let moisture reach the metal. A quick touch up costs far less than a panel later.
Protection film can reduce stone chip damage. Apply it only after the refinished paint has cured sufficiently under the paint system instructions.
Buying a used BMW
Walk around the car in daylight. These signs are reasons to look closer, rather than proof of accident damage on their own.
Panel fit
Compare the gaps around doors, the bonnet and wings. Look for an edge that sits higher, rubs or changes width along the panel.
Colour match
View adjoining panels from several angles. A shade difference deserves a closer check, although plastic and metal can reflect colour differently.
Paint edges
Look for overspray on rubber seals, trim and inside door openings. A sharp masking edge can also reveal previous paintwork.
Surface finish
Follow a straight reflection across the panel. Local ripples or a sudden change in texture may need inspection. Texture alone does not prove a poor repair.
Sensors and warnings
Parking sensor or driver assistance faults need diagnosis. Damaged mounts, wiring or calibration may be involved, but a warning alone does not identify the cause.

Models
Send your model, year and damage details so we can confirm the appropriate assessment and available repair work. M cars and M Sport packages use different bumpers, side skirts and trims from standard models, so we check the exact part numbers before ordering. Fitting the wrong bumper or trim is a common mistake that leaves gaps and mismatched shapes.
Steel, aluminium and composite components require different methods. Structural, restraint-system and high voltage work need capability and equipment confirmed before acceptance. Do not assume a cosmetic repair quotation covers those systems.
Before repair approval
A cosmetic estimate cannot establish the condition of structural members, restraint systems or hidden mounts. Agree the assessment and available repair work before committing.
For applicable collision repairs, the plan should include complete diagnostic testing before and after repair. Calibration is a separate procedure determined by the affected system and repair instructions. Retain the relevant results.
Confirm any required body measurement, material-specific repair or panel replacement. Structural and restraint work must be accepted only with the required procedure, equipment and capability established.
Tell us if the vehicle is electrified and describe impact damage or warning messages. Confirm suitable assessment, recovery and any specialist arrangements before booking. Cosmetic repair does not include traction-battery repair.
The repair plan should address applicable seam sealing, corrosion protection and protective coatings. Ask which work is included and keep the paint-system curing and care instructions.
Keep the agreed panels and method, supplied parts, invoice and relevant diagnostic, geometry or calibration results. Check the finish, panel fit and agreed work at handover.
Confirm the offered paint, workmanship, parts and corrosion coverage separately. Request the duration, exclusions and claims contact before approval. Coverage depends on the actual job and supplied products.
Independent BMW workshop
BMW Repair Dubai is at 39 Al Quoz 4, Dubai, open Monday to Saturday, 9am to 7pm. Share the model, year, damage photos and any warning messages.
Confirm which work will be completed at the workshop and whether any specialist work needs another arrangement. The agreed quotation should make that clear.
Confirm assessment charges, access and collection arrangements. Free pickup and delivery are available in Dubai. Suitable recovery for an unsafe vehicle and any separate charge must be agreed before dispatch.
For collision damage, use official Dubai Police services and confirm the required report or repair permission. Insurance authorisation and the permitted repairer depend on your policy.
Call 056 464 6081Your total depends on the damage, repair method, parts and paint. Published market examples on this page start at AED 300 for eligible paintless dent repair per panel and list panel painting at AED 600 or AED 700, excluding VAT. These are another workshop's prices. Ask BMW Repair Dubai for an estimate, then confirm the repair quotation after assessment.
We start with the paint code or build information, compare the colour with the vehicle and agree any adjoining-panel blending. The aim is a consistent colour and sheen. Existing paint condition and specialist finishes can affect the result.
Follow the official Dubai Police process for collision damage and confirm the report or repair permission required for your case. For an insurance claim, obtain insurer approval and confirm the permitted repairer before work starts.
That depends on your policy. Some insurers use only their own approved garages. Check your policy first, then contact us and we can talk through the options.
Often, yes. Suitability depends on paint integrity, panel material, stretch, dent position and access. Inspection establishes whether paintless dent repair can preserve the finish.
The decision depends on material, damage location, mounting integrity, sensor areas and the applicable repair instructions. Inspection establishes whether the bumper can be repaired or needs replacement.
Small scratch and dent jobs are quicker. Panel repaints and accident repairs take longer, especially if parts need ordering. We give you an expected time with the quote.
Confirm the diagnostic tests and any required calibration in your repair plan. A warning light being off is not a substitute for the required procedure. Keep the relevant scan and calibration results with the invoice.
Genuine BMW and suitable alternative parts depend on the application and availability. The quotation should identify the manufacturer, product and condition. Ask for the exact offered part before approval.
Small chips may suit touch-in repair, while widespread damage may justify panel refinishing. Protection film can reduce later chip damage, but application must wait until the paint system permits it after curing.
Confirm the charge before assessment and whether it is included if you approve the repair. Dismantling to reveal hidden damage must be agreed separately where required. A photo estimate does not authorise chargeable work.
The repair plan and quotation should be updated with the findings. Additional work needs your approval before proceeding. Keep the revised estimate with the repair record.
Free Dubai pickup and delivery do not establish that every accident-recovery situation is included. If the car cannot be driven safely, confirm the recovery method, access requirements and any separate charge before collection.
Ask for the written terms for your particular repair, including duration, covered defects, exclusions and the claims contact. Paint, workmanship, parts and corrosion coverage should be distinguished before approval.
Get a quote
Send photos for an initial estimate or call to arrange inspection at our Al Quoz workshop. We confirm the agreed repair and price before approval. Ask about free Dubai pickup and delivery. Suitable recovery for an unsafe vehicle and any separate charge must be agreed first.