Diagnostic scan
From AED 150Fault-code scan and report. Further tests and repairs are quoted separately.
Independent BMW workshop in Al Quoz
BMW X6 Repair in Dubai
Book scheduled servicing or get an xDrive shudder, coolant loss or suspension warning checked. A fault-code scan and report starts at AED 150. We explain the findings and fitted price before repair.
Workshop starting prices
What an X6 visit can cost
Start with the price for the work you need. We confirm the fitted total before you approve the job.
Front brake pads
From AED 600Workshop starting price for eligible pads and labour. Confirm X6 fitment, wear sensor and disc condition.
Engine oil and filter
By quotePrice depends on the engine, oil approval, fill quantity and filter. Ask for the total for your X6.
Battery replacement
By quoteConfirm battery type and capacity by VIN. Ask if fitting and registration are included.
See brake pricing and inclusions or what an oil service includes.
Dubai market guide
Automatic gearbox repair budgets
These are general Dubai market ranges. Ask whether they apply to your fitted gearbox and confirm the complete price before approval.
See gearbox pricing and inclusions- Automatic transmission fluid and filter
- AED 1,000–2,200
- Check fluid approval, filter or pan, fill procedure and verification.
- Confirmed pan, sleeve or seal leak
- AED 1,800–4,500
- Check which seal or pan is included and whether fluid and leak rechecks are covered.
- Automatic transmission rebuild
- AED 9,500–22,000
- Confirm the internal fault and whether removal, fitting, fluid and verification are included.
Symptoms and first checks
What is your X6 doing
Choose a symptom to see what to report and where the checks start.
Fitment by generation
Which X6 do you drive
Share the model year and badge. We use the VIN to confirm parts fitment when needed.
- E71
First generation
Bring any recent service or repair records, especially for repeat warnings or leaks.
- F16
Second generation
Confirm optional suspension and brake equipment before ordering parts.
- G06
Third generation
The xDrive40i, M50i and M60i differ by year and market. Some G06 models also use a 48-volt system. Confirm equipment by VIN before ordering parts.
- X6 M
BMW M models
Share the year and whether it’s an X6 M Competition. The fitted brake and suspension package determines the parts and measurements needed.
Cooling and engine oil
Find the source of a leak on your X6
We trace the fluid back to its source before quoting repairs.
Coolant loss between visits
Share how often you top up and whether you see a puddle or dried residue.
We inspect the reservoir, hoses and joints. A pressure test can help locate the leak. Ask if the quote covers refilling and retesting.
Oil spots or a smell after parking
Tell us when you see spots or smell oil and mention any recent gasket work.
Oil can travel along the undertray. We trace fresh oil above the drip and may clean and recheck the area if there’s old residue.
Suspension and brakes
Work out when the knock or shake starts
When the symptom appears helps us choose the first check.
- One corner sits lower after parking
- Note which corner drops and how long the car was parked. On air suspension models, we check for leaks and test system operation.
- Knock over bumps or during turns
- Mention recent tyre or suspension work. We inspect tyres, joints and dampers on the affected side.
- Shake mainly when braking
- Tell us if the shake reaches the pedal or steering wheel. We measure pads and discs and confirm which sensors or hardware are needed.
xDrive and transmission
Find when the shudder starts
A shudder in a car park, a vibration at road speed and a jolt during a shift can need different checks. Share when it happens and any recent tyre work.
Tight turns or pulling away
- Start here
- Check tyre sizes, pressures and wear on all four wheels. If front and rear sizes differ, confirm each size is on the correct axle.
- Next decision
- When tyre fitment is correct, the workshop can follow the applicable xDrive and transfer-case test plan.
Vibration at steady speed
- Start here
- Note the speed range and whether the steering wheel or seat shakes. Mention recent wheel work or an impact.
- Next decision
- Tyre, wheel or driveline checks can be prioritised based on where and when the vibration is reproduced.
Jolt during a gear change
- Start here
- Report the gear, speed and whether the gearbox was cold or warm. Compare the shift with stored faults and relevant readings.
- Next decision
- Use the confirmed gearbox or driveline findings to agree further testing, fluid work or mechanical repair.
BMW’s guidance for applicable G06 and F96 vehicles starts with a tyre inspection before transfer-case diagnosis. Read BMW’s service bulletin.
Rear lighting
Find what failed before replacing the tail light
Share the dashboard message, the affected side and whether it’s the running light, brake light or indicator. A short video helps if the fault comes and goes.
- Check the circuit
- Ask whether the connector, wiring and power supply were checked, especially if more than one function fails.
- Identify the fitted lamp
- Confirm the lamp section and VIN before pricing parts. Ask whether the quote is for a circuit repair or a replacement assembly.
Scheduled service
Book what is due on your X6
Bring the service reminder or latest invoice if you have it.
- Oil and filterConfirm the approved oil, fill quantity, filter and reminder reset.
- Brake itemsCheck the brake fluid due date and pad and disc wear on both axles.
- Filters and ignitionUse service records to check when filters and petrol-engine spark plugs are due.
- Transmission and xDrive fluidsAsk which unit, fluid and filter or pan are included. If there’s a shudder, start with diagnosis.
Parts and labour
What to look for in your X6 quote
Compare the inspection findings and complete fitted price before approving the work.
Before you approve
- Cooling leak Which part leaked? Does the quote include refill and retest?
- Ride height fault Which component failed? Does the price cover one side or both?
- Tail light fault Which lamp section is affected? Is the quote for wiring or the lamp?
When you collect the car
Match the invoice to the estimate and ask which checks confirmed the repair.
Ask what to monitor, which items can wait and when they need attention.
Pre-purchase inspection
Check a used X6 before you commit
Ask the seller for the VIN and service records. Agree a cold start, lift inspection and road test where practical.
- 01
Check the records
Confirm the engine and equipment, then look for invoices for cooling, suspension and drivetrain work.
- 02
Inspect and drive
Compare tyre fitment on both axles, check ride height after parking and describe any shudder or brake vibration during the drive.
- 03
Get findings in writing
Separate immediate repairs from routine servicing and agree which items need more testing before pricing.
Before you book
BMW X6 repair FAQs
Can I book a service and a fault check together
Yes. Mention both when you contact us. We can discuss the scheduled work and the diagnostic scope separately so you know what each part of the visit covers.
Can you quote from the year and mileage alone
They help with an initial estimate. A fitted quote may also need the VIN or an inspection, especially when several brake or suspension packages were available.
Does a tight-turn shudder mean I need a transfer case
Tyre sizes, wear and pressures are useful first checks. The workshop can compare those findings with the road test and fault data before quoting transfer case work.
What should I ask for with the estimate
Ask what was found, which parts and labour are included, the fitted total, and when parts are available. Ask what will be checked again after the repair.
BMW Repair Dubai in Al Quoz
Book your X6 inspection or service
Send your model year and the service or symptom. If you need collection, include your area and tell us whether the car can be driven.