Confirm the finding
Ask which leak, fault or measured wear was identified and how it was confirmed. Agree any additional testing before it starts.
E63 Coupé and E64 Convertible
Oil marks after parking, an uneven V8 idle or a gearbox warning? Our Al Quoz workshop checks the affected system and gives you a fitted estimate. Book N62 V8 servicing or ask about an E64 soft-top fault. Initial scan and report from AED 150.
Pricing and approval
The scan records faults. Oil or coolant leak tracing, mechanical tests and soft-top diagnosis are quoted separately as needed.
Confirm the engine, brake specification and items due before booking.
Check parts, labour, fluids, access and tests before approving the work. An initial scan does not include leak testing, roof adjustments or gearbox repair.
Related service · V8 oil service · Front brake pads · BMW service packages.
Planning for larger repairs
Published Dubai market ranges below are budgeting references. Confirm what is included, which gearbox is fitted and what the inspection found before using either estimate.
See the BMW gearbox market price guide for the automatic gearbox estimates.
These automatic ranges apply to the described work. A manual clutch or SMG actuation fault requires its own assessment and estimate.
Ask for the fitted total and any setup, expected completion and written coverage. Agree whether an additional test or dismantling charge applies before proceeding.
Start with what you notice
Open a symptom to see what the workshop checks first. The exact warning and when it occurs help us choose the next test.
Trace fresh oil upwards and check whether it is contacting a hot area. The lowest wet point may be far from the source.
Identify where the smoke comes from and when it appears. Review oil use and check external leaks before choosing internal tests.
Review the affected cylinders and cold or warm conditions, then check ignition, fuelling, intake or valve control as indicated.
Identify the affected circuit and evidence of loss. Follow the handbook if the warning instructs you to stop.
Identify manual, Steptronic or SMG before choosing tests. Describe the gear and temperature when it happens.
Record the last movement and warning. Check roof interlocks, position signals and operation where safe.
N62 external oil leaks
A spot underneath or a smell after a warm drive can have more than one source. Oil can travel along the engine, brackets or undertray. Ask which joint was confirmed leaking and what has to come off to reach it.
Related service · BMW engine repair.
Smoke and oil use
Tell us when it occurs and share any oil top-up record. Tailpipe smoke after a long idle is a clue for investigation. It does not establish that valve stem seals have failed.
Avoid running the engine just to reproduce heavy smoke. If a stop warning appears, follow the vehicle handbook and call to discuss assistance.
Cooling system and temperature warnings
Repeated top-ups need a leak check. Tell us whether the loss appears after parking or after a warm drive. A puddle may be absent if coolant collects above the undertray or leaks only under certain conditions.
Related service · BMW coolant leak diagnosis.
Body and drivetrain fitment
Both versions use the 4.4-litre N62 Valvetronic V8. Send the VIN, production date and market so we can confirm the gearbox, body equipment and parts.
Related service · BMW 6 Series range.
Rough idle and misfires
Tell us if it happens at the first cold start, after a hot restart or only under load. A code points to the next test. Cylinder, air supply, fuel and valve-control findings determine the repair.
Related service · BMW engine diagnostic checks.
Manual, Steptronic and SMG
The 645Ci was offered with three six-speed gearbox types in applicable markets. Tell us when the symptom appears, how the car selects gears and whether anyone has recently worked on the clutch or transmission.
Note whether the noise, slip or difficult selection changes with clutch position. Inspect clutch operation, linkage, mountings or the gearbox as the findings indicate.
Describe delayed engagement, a specific shift or a road-speed vibration. Check fault data, leakage and service history before recommending fluid work or repair.
A slow or missed shift can call for checks of clutch condition, actuation, hydraulics, control and the applicable setup. The exact warning and any previous work matter.
Related service · BMW transmission testing and repair.
E64 convertible roof
Tell us whether the roof refused to begin, paused during movement or reached the end without locking. Include the warning, whether the glass moved and any recent battery, roof or body work.

Note the roof position and which movements completed, including glass, lid or latching as applicable.
Review relevant interlocks, supply voltage and stored faults before repeated operation.
Use the model-specific procedure to inspect relevant position signals, mechanism or hydraulic operation as indicated.
When safe, check a complete cycle and confirm the applicable windows, roof and latching functions.
Slow cranking or no start
Describe whether the engine turns slowly, spins normally without firing or does not turn at all. Tell us if it happened after sitting, after a short hot stop or immediately after a battery replacement.
The first checks depend on the symptom. Battery state, voltage drop and starter operation can help explain a slow crank. A normal crank with no start can need different engine-management or authorisation checks.
Related service · BMW battery replacement.
Brakes and chassis
Note whether the problem follows braking, speed or road surface. Measurements and a check of the fitted hardware help narrow the repair.
Check pad and disc condition, relevant hub surfaces and the fitted brake package before pricing parts.
Record the speed and check tyre condition, wheel fitment and balance as indicated. Mention impacts or recent tyre work.
Check applicable arms, bushes, joints and dampers. Tell us where the knock is heard and whether the car pulls.
If braking or steering feels unsafe or a stop warning appears, stop somewhere safe, follow the handbook and call to discuss recovery.
Related service · BMW brake repair · BMW suspension diagnosis.
V8 service checklist
Bring the service display, mileage and past invoices. Prioritise any current fault separately from scheduled maintenance, then agree the oil, filters, fluids and wear items that apply to this car.
Confirm BMW approval and fill quantity, then record the fitted product.
Check the service history and fitted engine before deciding what is due.
Read the due date and measure disc and pad wear separately.
Review previous leaks and look for visible deterioration. Repeated coolant loss needs diagnosis.
Identify the gearbox type and confirm earlier fluid or clutch work before selecting maintenance.
Check ageing or repeated low-charge symptoms and record completed reminders and work.
Related service · BMW maintenance services.
Tell us how long the car has been parked, whether it starts from cold and what documentation is available. A baseline assessment can identify immediate issues, maintenance that is due and work that can be scheduled later.
Long summer days, slow traffic and AC running at full all put extra load on the cooling system. The AC condenser sits in front of the radiator, so the radiator works in air that is already hot. Plastic parts that have been heat cycled for years become brittle, and an existing small leak can worsen. A winter leak also needs attention.
Record smoke, unusual sounds and warning messages before the seller warms the engine.
Check dated invoices for oil leaks, cooling repairs and gearbox work. Ask what was actually replaced.
Arrange a safe roof-cycle check and inspect trim for moisture. Tell us about earlier glass or bodywork.
Confirm what can be tested, including whether a road test is practical. Request priorities and a written list of findings.
Before authorising work
Ask which leak, fault or measured wear was identified and how it was confirmed. Agree any additional testing before it starts.
Identify the parts by manufacturer and specification. Ask what access, fluids, labour and setup are included. Check where adjacent work would share labour.
Confirm timing, repeat checks and written coverage or exclusions. Keep the completed invoice and find out what to do if the symptom returns.
Before booking
Get answers about diagnostic pricing, oil leaks, gearbox fitment and E64 roof checks.
The fault-code scan and report starts from AED 150. Leak tracing, physical inspections and detailed gearbox or roof testing are priced separately if needed.
A photo helps locate the first area to inspect. Oil can spread from a higher joint, so the fitted estimate depends on confirming its source and what needs removing to reach it.
Blue tailpipe smoke can indicate oil burning. Its timing, oil-use history and other test findings guide checks for valve seals, crankcase ventilation or other causes.
Send the VIN and market so the workshop can confirm the manual, Steptronic or SMG equipment. The symptoms, parts and tests differ by gearbox.
Keep clear of moving components and follow your vehicle handbook. Tell the workshop the roof position and displayed warning so it can discuss suitable collection.
Yes. Share the service reminders and current symptom so each item can be assessed and priced separately.
Free Dubai pickup and delivery are available by arrangement. If the car cannot drive or the roof is stuck, share its condition so the workshop can confirm suitable transport.
Visit the Al Quoz workshop
Send the body style, VIN, mileage and gearbox type if known. Add the exact warning, when you first saw the leak or where the roof stopped. Tell us if you need collection.
